GURPS Wiki

"The material presented here is a community original creation, intended for use with the GURPS system from Steve Jackson Games. This material is not official and is not endorsed by Steve Jackson Games."

READ MORE

GURPS Wiki
Advertisement
GURPS Wiki
This is on the Secondary Characteristic. For the maneuver see Move

Basic Move is a Secondary Attribute that is the character's ground speed in yards per second. It is normally equal to Basic Speed (dropping all fractions), before being bought up. It can be modified:

  • Cost: ±5 points per ±1 yard/second

Encumbrance and Move[]

  • No Encumbrance (0): Weight up to Basic Lift. Move = Basic Move. Full Dodge.
  • Light Encumbrance (1): Weight up to 2 x Basic Lift. Move = Basic Move x 0.8. Dodge -1.
  • Medium Encumbrance (2): Weight up to 3 x Basic Lift. Move = Basic Move x 0.6. Dodge -2.
  • Heavy Encumbrance (3): Weight up to 6 x Basic Lift. Move = Basic Move x 0.4. Dodge -3.
  • Extra-Heavy Encumbrance (4): Weight up to 10 x Basic Lift. Move = Basic Move x 0.2. Dodge -4

Alternate Move[]

  • Air Move: Basic Speed x 2 (dropping all fractions). Basic Move on the ground remains the same.[1]
  • Water Move: Basic Move/5, rounded down[2]
    • Amphibious: Water Move = Basic Move for both land and water.
    • Aquatic: Water Move = Basic Move for water only, land Move is 0.

Enhancements[]

  • Soaring (+10%) - despite the name this can also apply to water move(?)

Vehicle and Spaceship Move[]

  • Vehicle Move is composed of two parts: Acceleration/Top Speed
  • Spaceship Move is also composed of Acceleration/Top Speed but Acceleration is in Gs (x 10 for yard/sec Move) and Top Speed is in Delta-V or miles per second (x 1,760 for yard/sec Move)

Classic Move[]

  • Running added to Basic Speed only for determining Land Move (skill level/8, retain fractions); it had no effect on Dodge or Basic Speed itself.

Quick and Dirty Calculations[]

For a really quick and dirty conversion from Basic Move to miles/hour multiply Basic Move by 2. For km/hr multiply Basic Move by 3 and for knots/hour multiply Basic Move by 1.8. This is not exact but does a reasonable job.

The more precise equations are:

  • miles/hour = Basic Move (yd/sec) x 1 mile / 1760 yd x 3600 sec/1 hr (~2.045 miles/h).
  • km/hr = Basic Move (yd/sec) x 1 mile / 1760 yd x 3600 sec/1 hr x ~1.609 km/mile (~3.291 km/h).
  • knots/hour = Basic Move (yd/sec) x 1 knot/ 2025.3718285214 yd x 3600 sec/1 hr (~1.777 knots/h)

See also[]

References[]

  1. Basic Set pg 354
  2. Basic Set pg 18
Advertisement